2017-07-14

Jose M., TacoMan - Metrica (Original Mix) [Stereo Productions]



did you know, that we didn't always use the, "metric", (a system or standard of measurement), we used to have a cubit, which is an ancient unit, based on the forearm length, from the tip of the middle finger, to the bottom of the elbow. Cubits of various lengths were employed, in many parts of the world, (just depends or your genes), in antiquity, during the Middle Ages and as recently, as Early Modern Times, The ancient Egyptian royal cubit, (meh niswt), is the earliest attested standard measure. Cubit rods were used, for the measurement of length. A number of these rods have survived, two are known from the tomb of Maya, the treasurer of the 18th dynasty, pharaoh Tutankhamun, in Saqqara, another was found in the tomb of Kha, (TT8), in Thebes. Fourteen such rods, including one, double cubit rod, were described and compared by Lepsius in 1865. These cubit rods range from 523.5 to 529.2 mm, (20.61 to 20.83 in), in length, and are divided into seven palms, each palm is divided, into four fingers and the fingers, are further subdivided, the golden ratio has been used much, through the design of the universe, it's omni present, even if it is, called by another name, (lol), and has been encoded, into ancient megalithic structures, since before known pre-history, and The Great Pyramid, encodes enormous amount of numerical coincidence (there are no coincidences, pi, Phi, dimensions and movement of our planet, axial tilt, precession, speed of light, and more), the ancient architects were fully aware, of these special numbers, encoded in their design, or are we meant to believe, it's all pure luck, (pmsl), these numbers are the result of selecting 2 numbers, (7 and 11), for proportions, for the Great Pyramid?, The design of the Great Pyramid is based, on the ratio 11:7. This ratio (equal 1.571) is perfect approximation of the squaring the circle principle.
For the Great Pyramid, Base to Height Ratio 440/280 is exactly 11/7
Most pyramidologists appear to be chasing their tails, uncovering huge amount of numerical coincidences, embedded in the Great Pyramid,
It is simply unbelievable, however ALL of these numerical coincidences are result of selecting just 4 numbers for the pyramid design: 7, 11 (height to base ratio), 40 (the scale factor), and the 4th key number is the value of the measuring unit: Royal Cubit = 20.62 ” = 0.524 m. This single, fundamental design principle: 11 : 7 Base to Height Ratio generates ALL amazing mathematical properties of the Great Pyramid:
the Golden Ratio Phi=1.618 (the Great Pyramid is a Golden Pyramid: length of the slope side (356) divided by half of the side (440/2 = 220) height is equal to 1.6181818… which is the Golden Ratio Phi
squaring the circle ratio 1.571 (base/height = 44/28 = 1.571)
pi=3.14159… (2 x base/height = 2 x 44/28 = 3.14286 which is very close approximation of pi, = 3.14159…)
Perimeter of the square base, 4×440=1760, is the same as circumference of the circle with radius = height: 2x pi x height, (2x 22/7 x 280=1760),
The ratio of the perimeter to height, of 1760/280 cubits equates to 2x pi,
to an accuracy of better than 0.05%,
Side of the base (440) plus double height (2x 280=560) = 1,000,
Perimeter of the square base, is equal 4×440=1760 RC = 0.5 nautical mile = 1/7,200th of the radius length, of the earth,
the slop angle 51°.843
The Pyramid exhibits in the design, both pi and by Phi, given the similarity
of 2/ sqrt(phi), (2 divided by the square root, of Phi) with pi/2,
11/ 7 equal 1.5714
2/ sqrt(89/55) equal 1.5722
2/ sqrt(Phi) equal 1.5723
pi/ 2 equal 1.5708
Royal Cubit = 0.5236 m, pi – Phi2 = 0.5231
and more…
Does Great Pyramid encode “fractal” value of the speed of light?
The speed of light in a vacuum is 299, 792, 458 meters per second or 983,571,056.43045 feet per second or 186,282.397 miles per second.
Base of the Great Pyramid is a square with side B = 44o Royal Egyptian Cubits. Let’s draw two circles: one inscribed and one superscribed on the square of the base of the Great Pyramid.

Circumference of superscribed circle: 2x pi x R
Circumference of the inscribed circle: 2x pi x r
The difference of the circumference of both circles (lets call it C) is:
C = 2 x pi x (R – r) = 2 x pi x [ B/sqrt(2) – B/2 ] =
2x pi x B x [ 1/sqrt(2) – 1/2 ] = 1.301290285 x B
The length of the Egyptian Royal Cubit
Based on The Pyramids and Temples of Gizeh, by W.M. Flinders Petrie. 1883.
The unit of measuring length used by the ancient architects in the construction of the Great Pyramid was the Royal Cubit.
Petrie estimated the value of the Royal Cubit using some key dimensions of the Great Pyramid:
By the base length of the Pyramid, if 440 cubits (section ’43): 20.611 ± .002
By the base of King’s Chamber, corrected for opening of joints: 20.632 ± .004 inches
By the Queen’s Chamber, if dimensions squared are in square cubits: 20.61 ± .020
By the antechamber: 20.58 ± .020
By the ascending and Queen’s Chamber passage lengths (section 149): 20.622 ± .002
By the gallery width: 20.605 ± .032
The Average value of the RC (based on above numbers) is 20.61 inches.
It’s almost universally accepted that archaeologist Flinders Petrie’s determination of the royal cubit length at20.632 inches, from his measurements of the King’s Chamber in the Great Pyramid of Giza, was the likely measure to survey the dimensions of that pyramid, 440 royal cubits per base side, but the experts stop there, not then letting you know that those 1,760 royal cubits which total the Great Pyramid’s base perimeter length, when multiplied by 20.632 inches, equals half a modern nautical mile, or 1/7,200th of the radius length of the earth, so there certainly is a connection.
By most accurate series of measurements Petrie concluded that the royal cubit standard for the Great Pyramid was 20.620 ± .005 inches ( 523.7 mm).
Let’s use the lower value 20.615 ” for the Royal Cubit (allowed by the 0.005 ” accuracy):
the Royal Egyptian Cubit (RC) is 20.615 ” = 0.523621 m
B = 440RC = 9070.6″ = 755.883 feet = 230.393 m
Therefore C = 1.301290285 x B = 983.6 feet = 299.8 m
The value of C x 106 is surprisingly very close to
the speed of light in m/s
The speed of light in a vacuum is
983, 571, 056.43 feet per second =
299, 792, 458 meters per second.
Another very strange Great Pyramid “coincidence” related to the speed of light was discovered by John Charles Webb Jr. :
Precise latitude of the centre of the Grand Gallery (inside GP) is
29° 58′ 45.28″ N = 29.9792458° N
The speed of light in vacuum, usually denoted by c, is a universal physical constant important in many areas of physics ( 299,792,458 metres /s ).
Another interesting coincidence encoded in the Royal Cubit:
Royal Egyptian Cubit = 0.524 m
pi = 3.1416
3.1416 feet = 0.957 m = 1.8263 RC
2x (0.957 / 0.524 ) = 2x 1.8263 = 3.6526 = 365.26 x 10-2
Number of days in a year: 365.25
Another interpretation of the above:
circumference of a a circle with diameter equal 100 feet is
2 x pi x 100 feet = 2 x pi x 1200″ =7539.8″ = 365.74 RC
(or 356.25 RC measured in King’s Chamber)
The Missing Capstone Theory
The pyramidion (capstone) found near the Red Pyramid is nearly “96 cm from the top, measured along the edge“. This (and other capstones found in Egypt) suggests that Egyptians were not making huge capstones for their pyramids. Therefore assumption that missing capstone of the Great Pyramid was huge (30 feet at the base) is wrong. It is very likely that in addition to the missing pyramidion there is a layer of stones missing as well. Therefore the capstone was much smaller than the missing part of the pyramid.
To maintain perfect slope angle such a capstone would have to have identical proportions as the whole pyramid: 7:11. If we use the “Red Pyramid” capstone to estimate possible size of the capstone from the Great Pyramid, it seems reasonable to select 2 Royal Cubits (140th of the pyramid’s height) for its height. The capstone’s base in this case would be 3.14286 RC (as the result of keeping the same scale and proportions as the GP) . This is very close approximation of “pi”.
The missing capstone of the Great Pyramid was very likely 2 Royal Cubits in height (3.4267 feet = 1.0475 m ) with square base of 3.1428 Royal Cubits (5.4 feet = 1.646 m).


Note:
440/280 = 1.5714286 (3.14286 when multiplied by 2 ).
280/440 = 0.636363636363… (0.63 number with recurring decimal)
The Revelation of the Pyramids
The Revelation Of The Pyramids takes an in depth look into one of the seven wonders of the world, the Great Pyramids of Egypt. Mystery has surrounded these epic structures for centuries with theories varying from the scientific to the bizarre. However with over thirty-seven years of in depth research taking in sites from China, Peru, Mexico and Egypt, one scientist has as at last managed first to understand and then to reveal what lies behind this greatest of archaeological mysteries: a message of paramount importance for all mankind, through time and space.Observe the measurements of the Moon:
Equatorial radius 1,738.14 km (0.273 Earths) so
the Moon Diameter is: 3,476.28 km or 2,160 miles.
Let’s make this the cosmic unit, (one moon unit)
representing the ideal diameter of The Moon.
Diameter of The Sun =865,294 miles.
If we divide 865,294 by 2,160 astonishingly
we get 400.6,
The SOHO spacecraft was used to measure the diameter of the Sun by timing transits of Mercury across the surface during 2003 and 2006. The result was a measured radius of 696,342 ± 65 kilometres (432,687 ± 40 miles). Staying within the margin of error, measured radius of the Sun is 432,647 miles (or diameter 865,294 miles).
7 x 8 x 9 x 11 x 12 x 13 = 864,864 which is only 0.05% (430 miles) smaller than the measured value.
Also, 930 x 930 = 864,900 (only 394 miles less than measured value).
Equatorial Circumference of the Earth: 1,000 x 360 x 365.24 feet
= 131,486,400 feet = 40,077km
Official value for equatorial circumference of the Earth: 40,075 kilometers
That is truly a “cosmic” coincidence !!!
There is more… and the Great Pyramid has these values encoded in its proportions!
The radius of the Moon compared to the Earth is three to eleven, ie. 3:11.

Radius of Moon = 1,080 miles = 3 x 360 = 1 x 2 x 3 x 4 x 5 x 6 x (3/2 )
( 1080.030 miles = 1738.1 km )
Radius of Earth = 3,960 miles = 11 x 360 = 1 x 2 x 3 x 4 x 5 x 6 x (11/2)
(3963.167 mi 6378.1 km )
Radius of Earth plus Radius of Moon = 5,040 miles = 14 x 360 =
=1 x 2 x 3 x 4 x 5 x 6 x (14/2) = 7 x 8 x 9 x 10
(Actual 5043.197 miles )
1 x 2 x 3 x 4 x 5 x 6=720
1+2+3+4+5+6 = 21
21 x 240 = 5040
(720 x 21) / 3 = 5040
(720 x 21) / 14 = 1080
The ratio 3:11 is 27.3 percent, and the orbit of the Moon takes 27.3 days.
(Sidereal rotation period 27.321582 d (synchronous).
27.3 days is also the average rotation period of a sunspot.
you see the universe, (uni), reuses the same principles everywhere, like fixed parameters in a program as, standardz, hahahahahahaha, :) #edio
https://www.youtube.com/watch?v=BovYRhIQ4ZI

No comments: